How To Remove Svchost.exe

What Is Svchost.exe?

The full name of "svchost.exe " is "Gerneric Host Process for Win32 Services". Svchost.exe is a vital process for Windows operating system. it is a process that is used to load DLL files and programs that run on your computer.

It is likely that you get multiple schost.exe files loaded because one program needs to be grouped from other Windows services. Therefore, it is normal to see more than one svchost.exe process in the Task Manager.

Thought svshost.exe is a Windows system file, there might be some viruses that will infect the svchost.exe file in your computer. You have to know that the original location for svchost.exe is C:\Windows\Ssytem. If svchost.exe is found in places other than its normal location, you have to pay close attention because it is probably a virus and learn how to remove svchost.exe to ensure the stability and security of your system.
If you want to make sure that your system is under a stable and secure condition, you could run a quick exe error scan for your PC.

How to Fix Svchost.exe Errors?

If you are getting the following error message during startup, the solutions telling you how to remove svchost.exe are presented below.

Error message:
0se03c3a68
Solutions:

If you are using Windows Me or Windows XP, you can turn off the System Restore.
For Windows Me:

1.Go to Start > Settings > Control Panel > double click System
2.Go to the Performance tab > select File System
3.Left click Troubleshooting tab
4.Select "Disable System Restore "
5.Click OK

For Windows XP:
1.Log on to the system as Administrator
2.Go to Start > right click on My Computer > select Properties
3.Select "Turn Off System Restore"
4.Left click Apply and click Yes
5.Click OK

Restart your computer under the Safe Mode.
1.Start up your computer
2.After the first beep, press F8
3.Select the first option

Access the command prompt.
1.Go to Start > Run > type CMD > Click OK
2.Type the directory path of the folder of the Windows system files
Type the following information in the command prompt.
"attrib -h -r -s scvhost.exe", press Enter
"attrib -h -r -s blastclnnn.exe", press Enter
"attrib -h -r -s autorun.inf", press Enter
Type the following in the command prompt to delete the files.
"del scvhost.exe", press Enter
"del blastclnnn.exe", press Enter
"del autorun.inf", press Enter
Type "cd\" to return to the main Windows directory.
Type "attrib -h -r -s autorun.inf" in the command prompt, press Enter
Type "del wutorun.inf' and press Enter
Type "regedit" and press Enter
Locate the following entry.
HKEY CURRENT USER\Software\Microsoft\Windows\CurrentVersion\Run
Locate the following key.
HKEY LOCAL MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WInlogon
Locate the following key.
HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Services>
Delete the following subkeys: RpcPatch, RpcTftpd
Type Exit and press Enter
Reboot your computer

By: Nikki Ramelow

Article Directory: http://www.articledashboard.com

How to Setup Your Own Wi-Fi Network

Wi-Fi is the acronym of Wireless Fidelity and is also the well-liked name for 802.11 based technology. Some years ago, the flexibility of networking was the luxury reserve and was threaded behind the walls, to set up the Ethernet network connection. But now over the past few years, there a number of packages for home networking are available and relatively easy to use. One can use the pre-existing wirings to set up wireless network.

You can include three things, based on three established standards of the networking.

1. HomePNA 2.0 - It is Home Phoneline Networking Alliance that can cater on the phone line system of home.
2. HomePlug - It uses the existing power lines
3. 802.11b (Wi-Fi) standard - it gives the facility to go wireless.

Wireless network is useful for sharing the Internet access, printers and files. Before setting up the wireless network, Vista users are recommended to install the Windows Vista Service Pack 1 and Windows XP service Pack 2 for XP users. Service Pack makes things much easier and protects you against internet intruders, the hackers and worms.

Here Step by Step guide is given for set up

Important - Before going for setting up your own Wi-Fi network, you must read the documentation first for the router, Broadband modem and any other device that will be used.

Step 1 - Choose wireless equipment

First step for setting up a network is to make sure for the equipment you need. Always choose the equipments, according to the three different said wireless technologies. So before going to purchase the devices, just take a look at the list of required equipments.

List

- A Computer System
- A Broadband internet connection
- A wireless router
- A wireless network adaptor

Step 2 - Purchase your router

Three top wireless networking standards of the routers can be used for the maximum compatibility. These standards are: 802.11a, 802.11b and 802.11g. So before purchasing, you make sure that the router, what you are going to use is compatible with the three wireless network standards. Like a cordless phone base station, router converts the internet signals into a wireless broadcast.

Step 3 - Purchase a Wireless Network Adaptor

The adaptor connects your computer system to the wireless router. For the desktop computer, you should buy a USB wireless network adaptor but for laptops, you may buy a PC card based network adaptor. Every computer requires a separate network adaptor. Some times Windows may prompt you to inser the CD, which comes with the adaptor. Today the top adaptors are available from Netgear, Linksys, D-Link, Buffallo and Microsoft.

Step 4 - Physical Setup of Wi-Fi network

One can connect a router to the existing home network with the simple process. The chain "Internet - Broadband Modem - PC" then becomes "Internet - Broadband Modem - Router - PC". First you locate the cable or DSL modem then connect the router to the modem. This time modem should be the connected to the internet.

After this whole setup, your computer will connect wirelessly to the router and router will communicate through the modem to internet.

Step 5 - Get the Digital setup and security for the network

After getting hooked altogether, one must try to check the network by opening a web on the internet. The security process must include the encryption of the data. To ensure the security by encryption you should create an encryption key which is a series of the letters and numbers like the password.

Problems and their solution

The only problem with this setup is that we have to turn on the computer, which is connected to the internet to share the connection with the other computers. The use of the gateway with the built-in router, is a good solution of this problem. This is a hardware device which handles the internet traffic like a switchboard. Now this device is commonly referred as the router.

Article Source: http://EzineArticles.com/?expert=Shailesh_Vyas